异形烟包六面整形装置的设计.pdfVIP

2015 年2 月 烟草科技 Feb. 2015 第48 卷第2 期 Tobacco Science Technology Vol. 48 No. 2 异形烟包六面整形装置的设计 钟龙圣，廖艳培 广东中烟工业有限责任公司梅州卷烟厂，广东省梅州市梅江区环市北路 514011 摘要：为解决CH 盒外透明纸包装机整形器无法对异形烟包进行整形加工问题，设计了异形烟 包六面整形装置。该装置的控制系统由1 个PLC 程序控制器、4 个二位五通电磁阀和1 个三位 四通手柄阀组成，通过驱动气缸推动烙热板，实现对异形烟包的两短侧面、两长侧面、上下两平 面的熨烫整形加工。结果表明：实现了异形烟包透明纸整形加工工序的自动化，提高了烟包整 形效率，消除了小盒烟包透明纸松弛、折皱等缺陷，缺陷烟包剔除量由27 包/班次降低为4 包/班 次，保证了卷烟产品品质。 关键词：包装机组；异形烟包；整形器；透明纸 中图分类号：TS434 文献标志码：B 文章编号：1002-0861（2015 ）02-0096-03 DOI: 10.16135/j.issn 1002-0861 DeviceforShapingSixSidesofSpecialCigarettePacket ZHONG Longsheng and LIAO Yanpei Meizhou Cigarette Factory, China Tobacco Guangdong Industrial Co., Ltd., Meizhou 514011, Guangdong, China Abstract: The shaping device in CH over wrapper is not able to match cigarette packets with special shape, therefore a device for shaping six sides of special cigarette packet was designed. The control system of the designed device was composed of a PLC, four two-position five-way solenoid valves and a three-position four-way manual valve. Heaters driven by cylinders heated the film wrapping on the six sides of a packet. The results showed that the film heating and shaping was automatically completed, the shaping efficiency was improved, the film wrinkling or loosely wrapping packet was eliminated, and the rejected defective packets decreased from 27 to 4 packet/shift. Keywords:Packing machine; Special cigarette packet; Shaping device; Film 为满足消费者对卷烟产品的需求，各卷烟生 处理，效率低，耗时耗力，且无法保证产品包装品 产企业在产品包装上进行了大量的改革创新，开 质。目前对于烟包整形已有较多研究和改进，廖艳 ［8］ 发了许多形状各异的异形烟包，以提升市场占有 培等 通过增加冷却吹风装置，解决了整形过程 ［1-2 ］