包装上的环保标志大全 家具之窗论坛.docVIP

RECYCLING SYMBOL SENSE CHECK (suitable when not stamping plastics) Always check with the supplier/IS for confirmation of packaging materials Symbols must represent packaging that is separable by hand from the rest when disposing/sorting If there is only room for one symbol then use the symbol that represents the outer packaging and not the inserts/fitments i.e. the box/blister/clam/bag not the vac-form/insert/printed card Where room is available add symbols representing each part of the packaging i.e. plastic blister with card insert could be - For UK only items label as stated below For UK only items, following the Labelling Back of Pack guidelines from J. Gorman where more than one type of plastic/packaging type is used i.e. PP carton with PVC vac form then indicate which symbol represents which component with wording e.g. Carton is Insert is RECYCLING SYMBOL SENSE CHECK (when stamping plastics) - Follow the guidelines above ignoring the UK only comments and extra representative wording. - Stamp the plastic only with its relevant symbol, ideally somewhere obvious to see and on the reverse side. Any inserts/fitments should be printed or stamped where appropriate with the symbol that represents their material content. SYMBOL MATERIAL COMMON USES PET Polyethylene Terephthalate (PETE is the acceptable US variant) Blister packs, window boxes, carton boxes, beverage containers, boil-infood pouches, processed meat packages, etc. HDPE High Density Polyethylene (PE-HD is the acceptable US variant) Milk bottles, detergent bottles, oil bottles, toys, plastic bags PVC Polyvinyl Chloride (V is the acceptable US variant) Blister packs, vacuum formings, food wrap, vegetable oil bottles LDPE Low Density Polyethylene (PE-LD is the acceptable US variant) Polybags, shrink-wrap, plastic bags, garment bags PP Polypropylene (including oriented polypropylene, OPP) Polybags, carton boxes, margarine and yogurt containers, grocery bags, caps