MaterialsScienceandEngineeringAnIntroduc幻灯片.pptVIP

CHAPTER 1. Introduction Materials Science and Engineering: An Introduction, 8th Edition William D. Callister, Univ. of Utah ISBN: 978-0-470-41997-7 figun_01_p01 figun_01_p01 figun_01_p01a figun_01_p01a figun_01_p01b figun_01_p01b figun_01_p01c figun_01_p01c fig_01_01 fig_01_01 Figure 1.1 The four components of the discipline of materials science and engineering and their interrelationship. fig_01_02 fig_01_02 Figure 1.2 Photograph of three thin disk specimens of aluminum. oxide that have been placed over a printed page in order to demonstrate their differences in light-transmittance characteristics. fig_01_03 fig_01_03 fig_01_04 fig_01_04 fig_01_05 fig_01_05 fig_01_06 fig_01_06 fig_01_07 fig_01_07 fig_01_08 fig_01_08 Fig 1.8 objects that are made of metals and metal alloys (from left to right):silverware (fork and knife), scissors, coins, a gear, a wedding ring, and a nut and bolt. fig_01_09 fig_01_09 Fig.1.9 Common objects that are made of ceramic materials: scissors, a china tea cup, a building brick, a floor tile, and glass vase fig_01_10 fig_01_10 Flpre1.10 Common objects that are made of polymeric materials: plastic tableware (spoon, fork, and knife), billiard balls, a bicycle helmet, two dice. a lawnmower wheel (plastic hub and rubber tire), and a plastic milk carton. (Photography by S. Tanner.) fig_01_11a fig_01_11a fig_01_11b fig_01_11b fig_01_11c fig_01_11c fig_01_11d fig_01_11d