PPAP英语版培训.pptVIP

APQP过程设计APQP Process Design 试产Pilot run 特别生产过程Significant Production run 样本Draw Sample 尺寸测量Dimensional measurement 材料性能测试Material Functional Performance test 能力研究Capability Study 提交PPAPPPAP submission 提交予顾客Submit to customer 供方保存Keep by supplier 图纸 Drawing + 规格 Specification + 工程改变Engineering Change + 顾客审批Customer approval 尺寸测量Dimensional measurement 材料性能测试Material Functional Performance test 完整尺寸测试(所有铸模 / 模具)Full dimensional Measurement (all cavity/mold) 能力研究Capability Study 特殊特性 Special Characteristic APQP 与 PPAP 的关系 Organization shall notify the authorized customer representative of any planned changes to the design, process or site. Upon notification and approval of the proposed change by the customer and after change implementation, PPAP submission is required unless otherwise specified. Example of changes requiring notification 1. Case -1.????? Use the parts that have different structure from the previous approved For example Use the alternative working method as specified in the drawing, and without engineering authorization Customer Notification and submission Customer Notification 2. Case 2 Use new and changed tooling, mould, cavity, forming die For example Only for the specific form or function, may affect the final product integrity. Not for those standard tooling ( new or repaired), e.g. Standard measurement jig, manual or auto tools. 3. Case 3 Production following refurbishment and adjustment of the tooling and equipments For the improved tooling or machine, or the capability and functional changes—do not mix up with the normal maintenance, repair, or parts changed. Customer Notification For those activities with the re-layout against the process flow diagram ( included the new added process), production sequence and steps changed. No approval is needed for the minor adjustment to fulfill the safety function: guards, ESD shield. Customer Notification 4. Case 4 Move the tooling or equipments to other production location or s