戴纳密克使用手册.docVIP

RE,GB系列减速机 安装维护手册 Description 简介 Supply conditions 供货状况 Storage conditions 储藏条件 Installation 安装 Version 版本 Gearbox design 减速器设计 Input connections 输入连接 Connection to the brake 和刹车的关联 Gearbox installation 减速器安装 Lubrication 润滑 Installation regulations 安装规则 Oil quantities 油量 Wheel driving gearboxes 轮边驱动型减速器 Special products 特殊产品 Warranty 担保 Overhaul index 彻底检查索引 Supply conditions 供货状况 The gearboxes are supplied as follows: 减速器按照以下的条件进行供货： ?arranged for installation in the assembly 按订单指示安装位进行组装。 position stated when the order was placed. ?Unless provided for otherwise by contractual 除非合同指定，不带润滑油。 arrangement, without lubrication oil. ?Painted externally with a red water-base 除非合同指定，减速器非加工面涂红色防氧化底漆。 antioxidising undercoat, unless provided for 此保护层适合一般工业环境，即使在室外，并可进一步 otherwise by contractual arrangement.This 完成表面漆。 protective coating is suitable for normal industrial rnvironments, even outdoors, and allows further finishing coats of synthetic paint to be applied. ?The extemal machined parts of the gearbox, such 减速器的易生锈部分，例如轴的外层，静止的表面，中心 as the outside of the shafts, the resting surfaces, 部位和内部运行的机械装置都需要涂上防氧化保护油。 centring units and likewise the internal kinematic mechanisms, require protecting with antioxidising oil. Suitably packed and dispatched, as require, in crates 按照要求，应使用木板箱，棘爪等合适的包装及运送工具。 or on pallets. Storage conditions 存放条件 For correct storage of the units, the following steps 为了取得正确的存放方法，必须按照以下的步骤： must be taken: ?For storage for over 2 months, protect the coupling 放置2个月以上的，需在接合处的表面如法兰， surfaces, such as the fla