moldflow+cad+doctor+中英文对照.docxVIP

translation 转化category 类别short curve 短曲线sliver face 淬面edge direction 曲线配向free edge 自由曲线edge used more than twice 重复曲线gap:in loop 未闭合的环gap:edge and base surface 面线不符intersecting loops 交叉循环loop with self-intersection 环自相交surface with self-intersect 自相交面surface with small patches 表面小块curve with short segments 曲线短段edge interference 曲线干涉simplification 简化free edge 自由边over-used edge 重复边inconsistent face in shell 和框架不一致的面tiny curve or segment 小曲线或小片narrow face 窄面aspect ratio,surface 长宽比表面self-intersecting curve 自相交曲线large curve gap 未闭合曲线sharp edge angle 锐利边缘角intersecting loops 外相交self-intersecting loop 自相交fellet 圆角chamfer 倒斜角hole 破洞boss/rib 大面上的小特征sheet hole 表孔step 台阶mergeable faces 混合面unbendable curves 不光顺曲线shell connection 框架连接点auto 自动1，mark change forbidden face 指定固定面2，auto stitch 自动缝和3，auto heal 自动修正small elements 微小元素1，remove short edge 清除微小曲线2，remove short segment 清除微小片段3，remove small surface 清除微小表面4，remove small padch 清除微小片体5，remove narrow surface 清除狭窄表面6，remove narrow patch 清除狭窄片体7，remove small face 清除微小曲面8，remove small shell 清除微小框架9，make surface-side degenerate 表面退化tangency 相切1, break cusp curve 打断尖瑞曲线2，divide crease surface 分解尖瑞曲面3，smooth edge connection 曲线相切4 smooth face connection 曲面相切curvature 曲率1，break curvature-disontinuous curve 打断非曲率连接曲线2，break curvature-disontinuous surface 打断非曲率连接曲面3，smooth edge connectons（curvature）曲线曲率连接4，smooth face connectons（curvature）曲面曲率连接irregular 相交1，merge edge terminals 和并曲线端点2，selective merge vertex 选择性和并顶点3，clean self-intersection 修正自相交4，clean intersecting-loops 修正外相交duplication 重复1，remove duplicate surface 清除重复表面2，remove du