股骨头坏死钽棒支撑植入术模拟及有限元模型的建立-中国数字医学.PDFVIP

数字医学研究与应用 Research and Application of Digital Medicine 股骨头坏死钽棒支撑植入术模拟及有限元模型的建立 ① ① ① ＊ ① 彭军 胡冬发 邓立柳 张秋霞 张宇栋 摘 要 目的：模拟股骨头坏死钽棒支撑植入术的手术操作流程，建立股骨头坏死钽棒支撑植入术的三维有限元模型,并模 拟股骨轴向受力状态的应力分布。方法：成年女性ARCO II股骨头坏死1例，做骨盆的CT扫描，运用MIMICS 15.0对骨盆进行三 维重建，按手术需求采用Pro/Engineer 5.0设计克氏针和钽棒三维模型，然后模拟钽棒支撑植入术的操作过程，接着利用 ANSYS 12.0对建立股骨头坏死钽棒支撑术的有限元模型。结果：重建了坏死区域的部位、形状和大小，模拟了钽棒支撑植 入术的操作流程，建立了股骨头坏死钽棒支撑植入术有限元模型节点共129 968个，单元共92 426个。结论：为进行目的明确 的定向研究和临床带教提供了高仿真性的数字模型；也为术前的手术模拟和生物力学分析提供了精度高的有限元模型。 关键词 临床教学 数字模型 三维可视化 钽棒支撑植入术 有限元 Doi:10.3969/j.issn.1673-7571.2014.04.021 [中图分类号] R681;Q811.2 [文献标识码] A Simulation of Support and Implantation of Tantalum Rod for Necrosis of the Femoral Head and Establishment of Finite Element Model / PENG Jun, HU Dong-fa, DENG Li-liu, et al//China Digital Medicine.-2014 9(4): 66 to 68 Abstract Objective: The operation process of support and implantation of tantalum rod for necrosis of the femoral head is simulated. Three-dimensional finite element model of support and implantation of tantalum rod for necrosis of the femoral head is established and the stress distribution of axial force of the femur is simulated. Methods: There is 1 case of ARCO II femoral head necrosis of adult female patient. The pelvis is scanned with CT. MIMICS 15.0 is used for three-dimensional reconstruction of pelvic. According to operation requirements, Pro/Engineer 5.0 is used to design 3D model of Kirschner pin and tantalum rod. And then the operation process of support and implantation of tantalum rod is simulated. And then ANSYS 12.0 is used to establish finite element model for support of tantalum rod for necrosis of the femoral head. Results: The location, shape and size of the necrotic area are reconstructed. The operation process o