01-06 路由协议命令(NE40).pdf

Quidway NetEngine40 命令手册 第二分册 目 录 目 录 1 IP 路由命令1-1 1.1 路由表的显示命令1-1 1.1.1 display ip routing-table 1-1 1.1.2 display ip routing-table acl1-2 1.1.3 display ip routing-table 1-5 1.1.4 display ip routing-table 1-7 1.1.5 display ip routing-table ip-prefix 1-8 1.1.6 display ip routing-table protocol 1-11 1.1.7 display ip routing-table statistics1-12 1.1.8 display ip routing-table verbose1-14 1.1.9 display ip routing-table vpn-instance 1-15 1.2 静态路由配置命令1-16 1.2.1 ip route-static 1-16 2 RIP 配置命令2-1 2.1 RIP 配置命令2-1 2.1.1 checkzero 2-1 2.1.2 debugging rip 2-2 2.1.3 default cost (RIP) 2-2 2.1.4 display rip 2-3 2.1.5 host-route 2-4 2.1.6 import-route 2-5 2.1.7 ipv4-family vpn-instance 2-6 2.1.8 network (RIP)2-7 2.1.9 peer (RIP)2-8 2.1.10 preference (RIP)2-9 2.1.11 reset2-10 2.1.12 rip2-10 2.1.13 rip authentication-mode 2-11 2.1.14 rip input 2-13 2.1.15 rip metricin2-14 2.1.16 rip metricout2-14 文档版本 07 (2008-03-26) 华为技术有限公司 i