检修汽车离合器（Repairing automobile clutch）.docVIP

检修汽车离合器（Repairing automobile clutch） Clutch is the engine power and transmission device gradually combined, so that the car started smoothly. When gears are hung and shifted, the power is temporarily cut in order to reduce the gear impact and to make the shift smoothly. When the car started difficult or can not start, do not add up quickly, serious when still can emit a burnt smell, this is because the clutch slipping caused by. When the clutch is slipping, the wear of friction plate or ablation, temperature of parts of clutch diaphragm spring will increased, temperature rise due to heat and soften and annealing, it will not be able to press the clutch disc and the efficient transfer of power. In order to prevent the clutch from slipping and ensure its normal operation, the clutch plate must be kept clean. In the use and maintenance of oil shall not be placed on the clutch plate, in case of accidentally stained with oil, the application of gasoline cleaning. Attention should be paid to checking the wearing limit of the clutch plate and the loosening of the rivet. When the wear reaches the limit of use, the clutch plate shall be replaced. In driving the vehicle, the clutch should be placed in the semi - joint work, otherwise it will make friction slip, and accelerated wear and tear, shorten the clutch life. Transmission use: Correct use and timely inspection and maintenance of the transmission can not only maintain its good technical status, effectively prolong its service life, but also contribute to the exertion of automobile power and fuel economy. According to different road conditions, change gears reasonably. Because in a certain way, the car uses a different driving gear, or whether as road conditions timely shift, fuel consumption is not the same, so the cars use a low gear after the start of the pavement in good condition, should as soon as possible to upshift, is not in use for a long time, low gear driving, nor narrowly in high gear driving. When a car is