平面设计输出分辨率(国外英文资料).docVIP

平面设计输出分辨率(国外英文资料) About inkjet and photo resolution settings - how to set resolution inkjet photo? Jet printing generally refers to the outdoor advertising picture output, it output a large picture, such as the highway next to a lot of billboards, the screen is the result of inkjet printer output. Output models are: NRU, SALSA 3200, color God 3200, etc., usually 3.2 meters maximum width. The media used in inkjet printers are generally cloth (commonly known as light box cloth), and ink uses oil-based ink. In order to ensure the durability of the picture, the printing company generally needs a little darker color than the monitor. Its actual output image resolution generally only needs 30~45DPI (in accordance with the printing requirements contrast), the actual size of the picture is relatively large, there are hundreds of square meters of area. Photo generally refers to the use of indoor, the output of its picture is generally only a few square meters size. For example, a small picture of advertising used by manufacturers at an exhibition. Output type, such as: HP5000, the maximum width of 1.5 meters. Photo machine medium used is generally PP paper, film, ink using water-based ink. At the end of the output image, but also coated, mounted board only finished product, the output resolution can reach 300 - 1200DPI (different models will have different), its color is relatively saturated, clear. Here we briefly introduce the printing and photo production and output of some of the simple requirements. 1 size: The size of the inkjet image is the same as the actual size of the requested image. It is different from printing without the need to set aside the bleeding section. In the printing company generally after the output screen has left white edge, the general situation is to stay with the net screen edge 10CM. You can figure and printing output company agreed, leaving many edges to buttonhole. The price is calculated per square meter, so the size of the picture can be m