幸免日常平常“掉落链子” 刹车日常颐养方法(国外英文资料).docVIP

防止平时“掉链子” 刹车日常保养方法(国外英文资料) ? The brakes are critical to the safety of the car. But the maintenance of the brake system is often ignored by the driver. The brakes are often checked until the brake system is not working properly. This is likely to result from sudden failures and brake failures, leading to catastrophe. Therefore, only when the brake system is regularly maintained and maintained can the normal operation of the brake system be ensured and the driving safety can be ensured. The braking system of car and minivan mainly uses brake oil to transfer braking force, while large passenger cars and heavy trucks adopt pneumatic brake system. There are different maintenance methods for different brake systems. Check the thickness of the brake shoe No matter what the brake system is, the braking function is finished by the brake pad (disc) or brake shoe (drum) at last. Therefore, periodically check the thickness of brake pads or brake shoes. When it is found that the thickness is close to or less than the minimum thickness specified by the manufacturer, it shall be replaced immediately. Check the brake pads, but also check the brake disc or brake drum wear, such as contact with dents on the surface, it is necessary to timely disc or drum light to ensure that the contact area with the brake pads to improve braking force. For car braking with oil circuit, check the level of brake fluid before starting out. If the oil level drops, check that the brake circuit is leaking immediately. The brake oil will fail for a long time because it absorbs moisture from the air. Brake fluid shall be changed regularly according to the manufacturers regulations. Its best to change it once a year. For air brake systems, pay attention to the constant discharge of water from the system and replace the dryer regularly. The moisture in the gas path system will corrode the pipe and affect the braking effect. In severe cases it can even cause brake system failure. In addition, check the workin