超音波法检测钢筋混凝土结构之钢筋强度.docVIP

超音波法检测钢筋混凝土结构之钢筋强度.doc

  1. 1、本文档共2页,可阅读全部内容。
  2. 2、有哪些信誉好的足球投注网站(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
  5. 5、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
  6. 6、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们
  7. 7、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
  8. 8、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
PAGE PAGE 1 超音波法檢測鋼筋混凝土結構之鋼筋強度 Measurement on the Strength of Steel in Reinforced Concrete Structure Using the Ultrasonic Pulse-wave Method 研究生:鄭民鴻 Cheng, Min-Hung 指導教授:吳志興 Wu, Chi-Hsing 【摘要】 本研究先建立鋼筋抗拉強度與鋼筋對打波速之迴歸方程式,再用改良式超音波法量測鋼筋混凝土試體之鋼筋波速CS,並將量測CS值代入迴歸式得到預測fy值。量測完畢後,將各試體敲開,取出鋼筋作波速對打量測及抗拉強度試驗,並與表面量測之CS值及預測fy值作比較,以評估預測值之準確性。 試驗結果顯示,最佳迴歸式為二次多項式fy=-0S2+ 314.0110CS-801737,相關係數r2=0.959,其CS值之適用範圍介於4900~5200 m/s之間。而量測CS值之標準差僅於4.3~17.4 m/sec之間,變異係數僅在0.87×10-3~3.42×10-3之間。量測CS值與對打CS值之誤差百分比僅在-0.08%~0.65%之間,預測fy值與抗拉強度fy值之誤差百分比在8%以內,試驗結果顯示本法之準確性。 關鍵字:超音波、非破壞檢測、鋼筋抗拉強度、縱波 【Abstract】 The study first established a regression equation of the steel tensile strength and its wave velocity measured by opposite faces. The improved ultrasonic pulse-wave method was then employed to perform surface measurement on reinforced concrete specimens to measure the steel wave velocities CS. The measured values were substituted into the regression equation to obtain the predicted fy values. After the measurement, the specimens were broken. The steel bars were taken out to be measured the wave velocities by opposite faces and to be performed the tensile strength test. The values were then compared with the measured CS by surface measurement and the predicted value fy to evaluate the accuracies of the predicted values. The test results shows that, the best correlation regression equation is a 2nd order polynomial equation fy=-0S2 +314.0110CS-801737. Its correlation coefficient r2=0.959. The applicable range of CS value is in 4900~5200 m/sec. The standard deviations of the measured CS values are only in a range of 4.3~17.4 m/sec. The coefficients of variation are only in 0.87×10-3~3.42×10-3. The error percentages between the measured CS values and those measured by opposite faces are only in -0.08%~0.65%. The error percentages between the predicted fy values and the tensile strength fy values are less 8%. The results shows the accuracy of the presented method. Keywor

您可能关注的文档

文档评论(0)

ailuojue + 关注
实名认证
文档贡献者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档