独立型充蓄太阳能发电系统在马拉威模拟与性能表现评估.pdfVIP

Chinese abstract 獨立型充蓄太陽能發電系 統在馬拉威的模擬與性能表現評估 馬拉威目前積極地推廣太陽光電系統，在2002-2008 年間公共與私人安裝的系統數 量大幅增加。而為了確立系統的標準與可靠性，政府於 2004 年制定獨立型充蓄太陽光 發電系統（BSPVS ）的國家標準，但是目前對安裝系統的技術性能缺少相關資訊。為 了縮小此差異，因此本文將對馬拉威的充蓄太陽能發電系統進行性能分析 。本研究以 TRNSYS 軟體進行 BSPVS 的性能模擬，並利用在台灣得到的實驗數據來驗證模擬結 果。本文說明位在 Chitedze 和 Mzuzu 二地區模擬系統的性能表現。結果顯示若是系統 依據馬拉威國家標準設計，則整年的平均性能比（mean performance ratio ）可達0.68 ， 太陽電池陣列的生產因子（production factor ）為 0.88 ，系統整體效率則為 78% 。而在 系統可靠性方面可發現其和當地的日照情形有關，以模擬的兩地區 （Chitedze 和 Mzuzu ）為例，Mzuzu 的負荷損耗概率(loss of load probability)為 0.13 ，而Chitedze 為 0.09 。此外，當白天系統運作時，若將對電池充電設定為系統的優先作動順序，則整體 系統的可靠性可提升 40% 。如果系統發電量低於負載的需求 （under-designed ），將會 使性能比明顯的下降、可靠性變低及電池長期處於未完全充電。 關鍵詞：獨立型充蓄太陽光發電系統，系統性能，TRNSYS 軟體 i Abstract The promotion of photovoltaic (PV) systems in Malawi yielded an increased number of institutionally and privately owned installed PV systems during 2002-2008. The national standards for battery-based standalone PV systems (BSPVS) were written in 2004 in order to ensure high standard and thus reliable systems. However, there had been information gap on technical performance of the installed system. To narrow the gap, a study was made with an aim of analyzing performance of PV systems in Malawi. As such, the BSPVS of Malawi were simulated using a TRNSYS simulation model which was validated by data measured from actual operating PV system in Taiwan. This study reports on performance results of the simulated systems located at Chitedze and Mzuzu in Malawi. The results showed that if the system is designed in accordance to procedures stipulated in Malawi standards then it is capable of operating annually with mean performance ratio of 0.68, PV array production factor of 0.88 and system efficiency of