EX500串行传送系统.pptVIP

EX500 Serial System Product Explanation Information for Instructors * Applicable manifold valves are as follows: ? SV1000/2000/3000/4000 VQC1000/2000/4000 ? (For details, please refer to the catalogues and other information on series SV and VQC.) ? EX500 Serial System Product Explanation Information for Instructors * The major specifications of the SI unit are given above. Series EX500 can be used with the series SV manifold valves and series VQC manifold valves (manifold valves adopting plug connection). Each station of solenoid valve or relay output module (only in case of series SV) can be added or removed freely. ? When only double solenoid valves or relay output modules (2 point output) are used, it is possible to connect 8 stations at the maximum. In case only single solenoid valves or relay output modules (1 point output) are used, it is possible to connect 16 stations at the maximum. ? As the output wattage varies among the valve series, series SV and series VQC have different maximum values of the block supply current. Series SV: 0.6W Series VQC: 1W (low wattage: 0.5W) EX500 Serial System Product Explanation Information for Instructors * Optional parts for series EX500 ? Power supply connector cable: For power supply (cable length: 1, 5[m]) Branch cable with M12 connector: Cable for branching (cable length: 0.3, 0.5, 1, 3, 5[m]) (To connect the GW unit, manifold with SI unit and input unit manifold) Communication connector/cable (The picture shows only the communication connector.): For connection with the PLC Terminal plug: To be used when the input manifold is not used. Waterproof cap: Covers a port that is not used as a sensor connector or for other purposes (for M8 and M12). EX500 Serial System Product Explanation Information for Instructors * The part numbers for series EX500 are given above. ? EX500 Serial System Product Explanation Information for Instructors * The part numbers for series EX500 are given above. The difference in the output s