水电家装（Hydropower home improvement）.docVIP

水电家装（Hydropower home improvement） Home improvement project is the decoration of the owners are most concerned about. Which items should be paid attention to in the project? How to check after completion? For first-time decoration users are very headache problem. Here, the small collection of a collection of the owners summed up the Encyclopedia of water and electricity. General process of hydropower transformation: Circuit: elastic line - slotted - wire through tube - wiring - Fixed Waterway: bomb line - slotted - cloth tube - sealed outlet - suppress Play wire: Electrician according to our requirements to determine the switch, socket, water pipe, wire tube position of the location, manually draw lines on the wall, The line shall be vertical, transverse, slotted, not more than 20 cm in length (as far as possible not to cross the slot), and take the shortest route, which is for the worker The requirement of higher professional knowledge, this step is the basis for the transformation of the entire hydropower industry, the industry can directly measure the actual number of projects Slotted: cutting machine and hammer out of the trough. This process requires workers to use the cutting machine in strict accordance with the line cutting, Be careful and careful not to ruin other walls. Cloth tube: in accordance with the slotting cloth pipe, the same groove is not allowed to double tubes, single tube is not many lines, strong and weak separation. Connection: after the wall pipe laying is complete, all joints require wiring, use insulation tape, shall not leak copper core. Fixed issue: circuit transformation diagram before fixing all the walls inside the tank top surface of pipeline, pipeline must use elevators, with a fixed pipeline. General owners should grasp the simple standards of acceptance of hydropower: 1 、 is the electrical product qualified product conforming to the relevant standards?. 2, the electric line adopts the flame retardant type dark pipe laying, the wire