高准确性双牵引机.DOC

DP15-200.50 High Accuracy Double Puller 高準確性雙牽引機 The configuration of the DP15-200.50 Puller is an over-head track system mounted to operate with two(2) puller heads moving over the existing fixed table run-out conveyor and requires no changes to the existing handling. DP15-200.50牽引的配置是一個“過度頭部跟踪系統”安裝操作兩（2）牽引頭移動現有的固定表運行的傳送帶，並要求不改變現有的處理 Advantages: 優點部份 Double Puller System will perform to tension the aluminum extrusion profiles and has the following operational advantages : 雙牽引系統將執行“伸拉”的鋁擠壓型材，並有下列的操控“優勢”： Standard Puller Features: 標準牽引機特點如下: 1. On multi-chamber dies, the puller helps overcome varying extrusion lengths between running strands. 牽引上多腔模具，有助於克服不同的運行鏈之間的擠壓長度。 2. Reduces twist of the profiles while extruding. 減少而擠出的型材的扭曲與變形 3. Effectively keeps the extrusion profiles separated during extrusion. 有效地保持分離擠壓過程中擠壓型材。 4. Keeps extrusions running straight. 保持擠型連續運行的擠壓直度。 5. Increases extrusion recovery - reduces scrap. 增加擠型的復甦 - 減少廢料。 6. Increases the permissible extrusion speed range increasing productivity. 增加許可的擠壓速度範圍 內 提高生產力。 Special Double Puller Features with Flying Saws: 雙牽引機+飛梭鋸切的特點： 1. Double Puller operates so that the puller can operate with zero dead cycle time. Allows for continuous extrusion. 雙牽引操作車手,可以操作零循環的時間。允許連續擠壓。 2. The Flying Saw operates to cut on exactly on the die mark and reduces scrap to zero. 飛梭鋸片操作上可完全鋸切在接料處，並可減少到零廢料. A) Technical Specification 技術規格 ◎ Puller Tension: 20 kg - 200 kgs each head 牽引機拉力:每頭:20kgs ~ 200kgs Infinitely variable and adjustable by the operator. 無級變速可調式操作。 ◎ Power: Main Motor servo-drive 15 HP. 動力:主馬達伺服 驅動 15馬力 ◎ Length: 50 meters.