IKEA包装规范概要1.pptVIP

* * * * * * * * * * * 2 page to description * * * * * * * * * * Normal text slide * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 16 kinds of paper level 3 kinds of paper level is for paper pallet * * * * * * * * * * * Paper pallet construction requirements纸托盘结构要求 Load bearer sheet quality货物承载纸板的品质 Material: Minimum quality IKEA150 最低的面板质量要求是IKEA150 2. Other material:IKEA230.Double IKEA230,IKEA260,Honeycomb. 面板材料有IKEA230,双层IKEA230,IKEA260,蜂窝纸板 Paper pallet construction requirements纸托盘结构要求 Test requirements for a foot and the complete paper pallet对托脚和完整纸托盘的测试要求 Compression test 托盘角压缩测试 2. Shear test 托盘角和面板之间的剪切力测试 The size of the low handling material shall be adapted to the actual size of the unit load. 纸托盘的尺寸要和相应托盘种类的木托盘匹配 The unit load built on low handling material shall be possible to store on a standard pallet. 纸托盘要尽可能放置在标准托盘上面 Paper pallet construction requirements纸托盘结构要求 Optimal IKEA unit load最佳宜家托盘 Unit loads containing multi-packs and consumer packages. When constructing a packaging solution, it is essential to consider the total solution and its function in the Supply chain. 当制定包装方案时，即销售包装、多件包装和单元货物，必须考虑总的解决方案及其供应链的作用，来最优化多件包装尺寸并以最佳方法来匹配单元货物尺寸。 The first preferred is 1200x760MM 第一选择尺寸 The second preferred is 1140x800MM 第二选择尺寸 The preferred unit load width shall be within 540 mm to 860 mm. With this width, all handling and storing can be done in an efficient and safe way. 优先选用的单元货物宽度是540mm到860mm之间。在这个宽度范围内，所有搬运和储存都可高效安全的进行。 540 mm comes from narrow unit loads handling with standard equipments. Exceptions to this shall be handled if products requires this. See Figure 58. 可以用标准设备搬运的最窄单元货物的宽度为540mm的，如果产品需要超出这个尺寸范围，也应能被搬运。 Optimal IKEA unit load最佳宜家托盘 Different fixation methods are allowed within IKEA. Generally the following methods are available: strapping, stretch filming, and shrink filming. What method to use depends on, for example, t