维控科技WINCE人机界面软件指南.docVIP

WECON CEPC Manul 1 CEPC CEPC is a development tool of WENCON HMI on WINCE 5.0. Its default directory for saving data is“Flash”. The SDK is provided by WENCONTECHNOLOGY. How to make LOGO of boot You must transfer your picture of logo into 16 bits BMP。We will show you how to transfer picture with photoshop Steps i)、Open picture then click on “save as...”The dialog will appear. Choose format BMP then click on save while popping up another dialog. ii)、Click on “Advanced Modes” iii)、Then please choose RS G6 B15 IV、Click on ok How to make your LOGO picture available Rename LOGO picture LOGO.BMP， then put it in the \\Flash\\ directory Function settings. The function settings include ：realign， reboot，transformation between horizontal screen and vertical screen， program settings when boot， touch buzzer， background light controller， date/time settings， display language transformation， MAC address settings， Serial port transformation， USB synchronization modes 2.1 Back to the home Exit the CEPC. Realign You can realign touch screen when touch spot can’t match。 Reboot You can reboot the screen。 You can transformation between horizontal screen and vertical screen You can choose the degrees needed to transfer。 2.5 Function settings You can set the system parameters which are touch buzzer，background light， date settings， display language transformation， MAC address settings， serial port transformation， USB synchronization modes。 Buzzer If the buzzer is targeted，the screen will exude the buzzing sound while touching。 Background light controller You can set lighting level and turn-off time of the background light。Different level represents different intensity。 When the turn-off time of the background light is targeted，you can set the turn-off time of the background light。 Date/time settings You can modify the time and date。Reset your time and date then click on save。 Display language transformation Two languages can be chosen：English and