剪力墙模板计算公式(国外英文资料).docVIP

剪力墙模板计算公式(国外英文资料) The shear wall template is calculated Calculate reference: building construction manual 4th edition Jiang zhengrong, the handbook of construction construction Construction load specifications (GB 50009-2001) Design specification of concrete structure gb50010-2002 Specifications of steel structure design specification (GB 50017-2003). The back support of the shear wall template consists of two layers of keel (wood or steel). The main keel, which is used to support the inner keel, is the outer keel. When assembling the wall form, the wall bolt will be pulled through the wall, and each wall bolt will be the fulcrum of the main keel. According to the specification, the load standard value of the dumped concrete is 6.00 kN/m2 when the capacity is larger than 0.8 m3. One, parameter information 1. The basic parameters The spacing (mm) : 250; Horizontal spacing (mm) : 500; The spacing (mm) spacing (mm) : 500; The vertical spacing of the wall bolts (mm) : 500; The diameter of the pull bolt (mm) : M14; 2. The main stare blankly information Keel material: steel corrugated; Section type: 48x3.5. Inertia moment I (cm4) : 12.19; Steel corrugated cross section resistance moment W (cm3) : 5.08; Primary lennos: 2; 3. Time stare blankly information Keel material: wood corrugated; The number of subarched limbs: 1; Width (mm) : 60.00; Height (mm) : 80.00; 4. The panel parameters Panel type: gluing panel; Panel thickness (mm) : 12.00; Panel elastic modulus (N/mm2) : 9500.00; Design value fc (N/mm2) : 13.00; Panel shearing strength design value (N/mm2) : 1.50; Wood and steel FCS (N/mm2) : 13.00; Square wood elastic modulus E (N/mm2) : 9500.00; Square wood shearing strength design value ft (N/mm2) : 1.50; Steel corrugated modulus E (N/mm2) : 206000.00; Design value of steel corrugated bending strength (N/mm2) : 205.00; The standard value of the wall template load is calculated Gamma -- the gravity density of concrete, which is 24.000 kN/m3; T - the initial clotting time