剪力墙结构混凝土施工计划(国外英文资料).docVIP

剪力墙结构混凝土施工方案(国外英文资料) Shear wall construction plan Yanzhou questar park houses a-7 residential buildings Unit: yanzhou yonghua building installation engineering co., LTD Shear wall construction plan One, engineering situation: The engineering structure for the shear wall structure, layers of 3.9 m, the second layer of 3.6 m high, high standard of 2.9 m, building area: 10453.75 ㎡, height of 64.9 m. According to the characteristics of the engineering structure, the design requirements of the construction organization and the standard of construction quality acceptance, the project is prepared and executed in order to ensure the quality and construction safety of the project. Second, preparation for construction Material requirements and main tools: Using commercial concrete, concrete to manufacturer qualification, raw material certificate, test report in advance submit supervision department to review, when pouring concrete symbols, pouring the concrete volume in advance written notice to the concrete company, be prepared. Working conditions After the inspection of steel and steel, check the iron and block to ensure the thickness of the protection layer. Check the embedded parts of the wall, the reserved holes, the location of the pipelines, the number and the fixed conditions. Check and clean up the residue in the stencil and rinse with water. 2) check to see if the joints are tight, the corners are reinforced, and all kinds of fittings are strong. 3) the vibrating rod is ready for four and the pump is in place. Measuring equipment - the caving cone and the concrete test die. 4) check the power supply, the line, and prepare the night construction lighting. Should have the following quality records: The quality certificate of the cement factory. Cement approach test report. The sand subtest report Stone test report The combination of the concrete and the concrete Strength test report of concrete test block The evaluation record of the strength of the concrete Concrete