塔筒制造工艺.docxVIP

塔 筒 制 造 工 艺 Tower Manufacture Technology阶段stage：制造准备preparation（ZB）工艺编号 No.工艺内容Contents工艺设备Equipment负责部门 Responsible DepartmentZB-1ZB-2ZB-3ZB-4合同、技术标准、图纸工艺评审 Technology review of contract, technical standard and drawing 合同、技术协议交底、填制交底记录Contract 、technical agreement had over, fill out the hand over record进行图纸、技术标准、技术协议评审，填制评审记录Review the drawing、technical standard、technical review, fill out the review record.按评审结果制定采购计划和工艺技术准备 Prepare the purchase plan and the technology as per review result 制定钢板、型材、法兰、焊材、油漆采购计划，标明型号、规格和采购技术标准Prepare the steel plates、section steel、flange、welding consumption and paint purchase plan, indicate the type、specifications and purchase technical standard.按工艺评审结果，编制专项工艺Prepare the specialized technology as per the technology review result.在合格供方范围内进行材料采购 Purchase the materials in the range of qualified suppliers严格按规格型号定尺采购Purchase as per the specifications and fixed length. 严格按技术标准采购Purchase as per the technical standard.材料出厂标识清楚，与出厂质量证明文件内容严格相符The marking of the material leaving factory is clear and in accordance with the contents in the quality certificate.原材料检验，按质量计划执行，对于钢板来说，必须满足EN10029规范的表1、表2和表3中的要求。公差等级应该在制造图纸中进行规定。Check the raw material as per the quality plan. For the plates, the requirement in the table 1,2 and 3 of EN10029 must be met. Specify the tolerance grade in the manufacture drawing.销售部Sales Department技术部Technology Department销售部Sales Department质检部Quality Control Department塔 筒 制 造 工 艺 Tower Manufacture Technology阶段stage：数控下料CNC Cutting（GY-01）工艺编号No.工艺内容 contents工艺设备equipment负责部门Responsible DepartmentGY-01-1GY-01-2原材料切割前准备 Preparation before raw material cutting根据生产进程确定要切割的筒节Confirm the section to be cut as per the production progress.根据筒节编号对照下料尺寸图纸，确定要切割的原材料尺寸Confirm the size of raw material to be cut as per the section No. and comparing with the cutting size drawing.根据此尺寸，查找要切割的板材，校核该板材尺寸及厚度是否与板材明细和下料切割尺寸相符Find the plates to be cut as per the size, check the plates size and thickness whether complying with the plates detail