模具设计工程师,口语对话AA工.docVIP

1）、这套模具资料都清楚了吗？ 是的，这套模具资料很清楚了； 没有，我还有些地方需要和你再确认一下； 现在，我们有基本的信息，例如：模穴数，产品材料，注塑机资料和模具材料等，但我们还没有标准件的标准，浇口要求和产品表面要求。 1) Is everything clear on this mould? ( Any question on this mould? ) -- Yes, everything is clear. -- No, I need to confirm some questions with you. -- Now, we have the basic information, such as: cavity number, product material, moulding machine specifications and steel information etc. But we do not have the standard of spare parts, gate requirements and the surface requirement of the part. 2）、这个产品有没有问题？ 没有问题，客户很专业； 我检查到了以下问题： 除了骨位以外，大部分都加了拨模角。它不会影响模具结构； 没加拨模角。我没有办法确认产品的分型面和模具结构。 2) Any question on this product? -- No. Our customer is very professional. -- I found the following problems after checking it: A. The draft angle is almost added except for some ribs. It will not affect the mould structure. B. No draft angle on the part. We can not confirm the parting line and the mould construction. 3）、模具有没有薄钢位？ 有，这里就有薄钢位, 模具强度会受影响； 我仔细检查了产品的3D图，没有看到薄钢位，我如果以后发现了，我会立即告诉你。 3) Are there any weak steel (thin steel) areas on the mould? 1. Yes, Here is weak steel. Mould strength will be effected. 2. I have checked 3D part drawings carefully, no weak steel. I will let you know if I find it later. 4）、注塑后，产品会不会有缩水现象？ 应当没有，产品壁厚挺均匀的，产品可能会有轻微缩水； 这个产品设计的壁厚不均匀，特别是这些柱位和骨位太厚了，缩水痕很明显。产品是外观件，我们强烈建议客户修改产品； 4) After injection, will there be any sink marks on the part? 1. Should not have. The wall thickness is even. The part might have slight sink marks. 2. The part wall thickness is uneven, especially these ribs bosses are too thick. The sink mark will be very visible. It is a cosmetic part. We strongly suggest customer to modify the part. 5）、注塑后，产品会不会变形？ 应当不会变形，产品挺简单的； 很有可能会变形。产品又长又薄，很容易变形。需告诉客户这事。 产品是平板件，很容易变形。我们需要找到一个合适的浇口位置； 5) Will there be any deformation on the part? 1. No, the part is quite simple. 2. Possible. The part is very long and thin, very easy to be deformed ( warpage). Please inform customer about this. 3. The part is flat, easy to be defo