尤尼佳Using the Scripts.docVIP

Using the Scripts Unicharm (Japan Shanghai) Using the Scripts Windows File location HULFT Program and setting files C:\program files\hulft5 Script file F:\PF\develop\tisi\bin Script log F:\PF\develop\tisi\log Send/receive file store F:\PF\develop\file File description F:\PF\develop\tisi\bin\sap_extr.bat: Post job for extracting the join file after receive. F:\PF\develop\tisi\bin\st_pf_send.vbs: TSR program for sending file. F:\PF\develop\tisi\bin\st_ot_recv.vbs: TSR program for receiving file. Start/Stop the program: In the design phase, the vbs files called from the scheduler when the system startup. After installation, we found that, this is not a good method for starting the program. Now, the program is installed as a service and can be easily operate. Due to the system is running on a cluster base environment. We must use Cluster Manager to start or stop the program. For starting: right click the target service and select 联机. For stopping: right click the target service and select脱机. Unix File location HULFT Program and setting files /appl/hulft HULFT logs /appl/hulft/log Send/receive script /appl/hulft/script Send/receive file store /appl/hulft/uc/file File description pf_extr: Post job for extracting the join file after receive. st_ot_send: Korn shell script program for sending files. st_ot_send.conf: Configuration file for the program st_ot_send. Start the program: nohup /appl/hulft/script/st_ot_send start /dev/null 21 Stop the program: /appl/hulft/script/st_ot_send stop Clear the status after unexpected termination /appl/hulft/script/st_ot_send end TISI (HK) LTD. Using the scripts Unicharm (Japan Shanghai) Page 2/3