燃料油泵房工艺设计及安装.pdfVIP

燃料油泵房工艺设计及安装 摘 要 燃料油泵房作为一个油库重要的组成部分，担负着收油、发油、输转、倒罐、 放空、油罐车和放空罐的底油清扫等多项任务。如何使泵房的工艺流程能安全、快 速地适应泵房所承担的任务，一直是油库工作者所关心的问题。本文从设计角度就 燃料油泵房的平面布置、工艺流程、设备的选型，管道的选型，敷设和防腐、泵的 、 轴封和冷却等方面进行了阐述。从设计参数的确定 流量和扬程的计算、过滤器， 法兰，阀门等附件的选用、泵用电动机和电葫芦的选用等方面，对燃料油泵房进行 了设计计算。另外，基于输送介质燃料油高粘度的性质，对泵房的伴热系统做了详 细的设计，以确保油品能顺利、畅通的输送到目的地。分析了泵房火灾和噪声的主 要来源，根据原因制定防范和治理措施。重点介绍了燃料油泵房的工艺流程、设备 选型和泵房的安装与施工。对比泵房的投入和建成后的效益，从经济效益和社会效 益两方面做了经济性分析。本文还对燃料油泵房的工艺与安装，以及它的发展历史、 作用和发展方向等方面做了相应的阐述。 关键词：燃料油，泵房，工艺设计，安装 I 燃料油泵房工艺设计及安装 Abstract Fuel oil pump house is the most important part in petroleum storage depot, which takes on many assignments, including receiving oil，sending out oil，pumping over ，tank switching，cleaning the tank trucks and blow-down drums .What to do can make the process flow adapt so many assignments safely and fleetly. It is a problem which is always concerned by tank battery operators. The study expounds fuel oil pump house planar disposal，process flow ，facility choosing，pipeline choosing ，pipeline laying ， pipeline corrosion protection ，pump packing and cooling from designing point. The study also contains some calculating, such as confirming design parameters ，calculating flow rate and choosing accessories，choosing electromotors. In addition , design the trace system of pump particularly. So the oil can arrive destination favorably and expeditely. Analyzing the primary sources of pump fire and yawp, establish measure to keep them away. Introduce fuel oil pump house process flow ，equipment choosing，pump house installation and construction in detail .Contrasting devotion and benefit ，make the economy an