cispr标准使用指南.docxVIP

– 1 – INTERNATIONAL ELECTROTECHNICAL COMMISSION INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE (CISPR) Guidance for users of the CISPR Standards 1 Introduction This guidance document is presented to you in order to guide you in the selection of appropriate CISPR EMC Standards applicable to your products, systems and installations. This document also gives an overview of the latest version of published CISPR Standards covering EMC aspects of products, systems and installations. The document is regularly updated and expanded. The Standards are divided into the following categories of Standards. 1.1 Basic Standards Basic EMC Standards give the general and fundamental conditions or rules for the assessment of EMC and related performance of all products, systems or installations, and serve as reference documents for CISPR Generic and Product Standards. Basic Standards are general and hence are not dedicated to specific product families or products; they relate to general information, to the disturbing phenomena and to the measurement or testing techniques. They do not contain any prescribed limits or any product/system related performance specifications. 1.2 Generic Standards Generic EMC Standards are Standards related to a particular environment, which specify the minimum set of essential EMC requirements and test procedures, applicable to all the products or systems intended for operation in this environment, provided there do not exist any specific EMC Standards for a particular product family, product, system or installation. Limits are included, and reference is made to the test procedures. 1.3 Product Standards Product Standards define specific EM requirements, test procedures and limits dedicated to particular products, systems or installations for which specific conditions must be considered. 2 List of available current CISPR Standards 2.1 General This clause lists the CISPR standards available. It should be noted that CISPR 16 “Specification for radio dis