压力机制动器系统设计.docVIP

青岛理工大学 毕 业 设 计 题目：J31-4000压力机制动器系统设计 学生姓名： 学生学号： 院系名称： 机电工程系 专业班级： 机械设计制造及其自动化083 指导教师： 2012年 6月20日 摘 要 压力机是一种结构精巧的通用性压力机。具有用途广泛，生产效率高等特点，压力机可广泛应用于切断、冲孔、落料、弯曲、铆合和成形等工艺。通过对金属坯件施加强大的压力使金属发生塑性变形和断裂来加工成零件。机械压力机工作时由电动机通过三角皮带驱动大皮带轮（通常兼作飞轮），经过齿轮副和离合器带动曲柄滑块机构，使滑块和凸模直线下行。机械压力机在锻压工作完成后滑块程上行，离合器自动脱开，同时曲柄轴上的自动器接通，使滑块停止在上止点附近。 　　 　 曲柄压力机结构设计 ABSTRACT Press is a structure of exquisite of universal press. With a wide range of USES, production efficiency higher characteristic, pressing machine can be widely used in cut off, punch, dropping material, bending, riveting and forming, etc. Craft. Through to the metal die-casting strong pressure on the metal plastic deformation and fracture occurred to processed into parts. Mechanical press work by motor through the triangle driving belt pulleys big (usually concurrently flywheel), after gear pair and clutch drive slider-crank mechanism, make the slider and the punch line to the downside. Mechanical press in forging press after completion of work to the slider uplink, automatic clutch withdraws, and crank shaft automatic device connected, make the slider to stop in up stoper nearby. Crank press machine belongs to the mechanical transmission kind of press, is an important pressure processing equipment, it can carry out all the stamping, die forging process, directly produced semi-finished products or product. Therefore, crank press in car, agricultural machinery, electronics, medical machine, national defense, aerospace and daily necessities, etc. industrial departments to a wide range of applications. With the development of industry, crank press the number and the variety of more and more, more and more high quality requirements, stressful, machinery manufacturing industry in his and other industrial production of the role of the press is getting more and more significant, improve mechanical automati