贝克多层压裂系统介绍[1].pptVIP

? 2005 Baker Hughes Incorporated All rights reserved. ? 2005 Baker Hughes Incorporated All rights reserved. Frac Point System Frac Point 多层压裂系统 Multi Zone Fracture System Earth Shattering Results Job number here-* Agenda 议程 Primary Objectives 主要用途 Frac Point System Animation 动画 System and Component Overview 系统及元件的发展回顾 History 历史 Development 开发 Runs 使用记录 Future Development 发展前景 Job number here-* Primary Objectives 主要目的 Control Where the Frac is Placed 控制压裂位置 Isolation of segments of the lateral 封隔侧向部分 Create fractures over the entire length of the lateral 在侧向全面产生裂缝 Increase NPV 增加净现值 Higher initial rate of production 初始产量高 Increased reservoir drainage 油藏泄流能力增加 Lower operational expenses 作业费用低 Job number here-* Ball Seat Sub 球座接头 Job number here-* Ball Seat Sub Developed as a temporary plugging system more than 25 years ago 25年前就用作临时桥塞 Estimated usage approximately 12,000 since development 其用途达12000种之多 Used across all of BOT’s product lines 可连接所有贝克的所有产品 Job number here-* “P” Pressure Activated Sleeve 压敏滑套 Used across all of BOT’s product lines 连接贝克所有产品 Port configuration was modified for Frac-Point applications Estimated usage since development approximately 7,500 结构经过改造，适合Frac-point使用； 用途多达7500种 Developed as a pressure actuated circulating sleeve more than 25 years ago 25年前就用作压敏循环套筒 Job number here-* Open Hole Packer Performance 裸眼封隔器性能 Based on 10K Premier Packer Chassis 基于贝克10K主要底板 6-1/8” Hole = 10,000 psi 6-1/4” Hole = 8,500 psi 6-1/2” Hole = 6,000 psi Temperature Rating: 100 – 350°F 耐温水平 Initiation Pressure adjust between 1,200 – 1,800 psi 初始压力调节范围 Torque Rating: on LTC connections : 6,000 ft. lbs. 扭矩水平，长螺纹和接箍连接 Dimensions 尺寸 Element Length: 9.0 in 胶筒长度 Max OD: 5.820” in最大外径 Min ID: 3.875 in 最小内径 Length: 4.3 ft 总长度 Job number here-* Open Hole Packer 裸眼封隔器 History : 历史 Developed as the P