起动机发电机培训.pptVIP

Intermediate Technicians Course * * STARTER MOTOR ALTERNATOR 中级技术员培训教程 起动电机 充发电机 MAGNETIC SWITCH ASSEMBLY电磁开关 YOKE机座 BRUCH HOLDER电刷架 BRUSH电刷 MOVING CORE转子 PINION GEAR PINION CLUTCH DRIVE SHAFT驱动轴 SHIFT LEVER拨叉 ARMATURE电枢 3.STARTER MOTOR 起动电机 1) OUTLINE AND STRUCTURE 外形和构造 CONVENTIONAL TYPE传统式起动电机 驱动齿轮 离合器 电磁开关 MAGNETIC SWITCH 电刷 BRUSH PINION驱动齿轮 FIELD COIL磁场绕组 电枢 ARMATURE REDUCTION GEAR减速齿轮 减速起动机 Reduction Type Starter (Internal-In Type) PINION SHIFT LEVER 拨叉 PINION CLUTCH离合器 主触电 MAIN CONTACTOR BALL BEARING球轴承 MAGNETIC SWITCH ASSEMBLY电磁开关 MAIN CONTACT POINT主触点 MOVING CORE转子 PINION GEAR驱动齿轮 PINION CLUTCH离合器 DRIVE SHAFT驱动轴 REDUCTION GEAR减速齿轮 SHIFT LEVER拨叉 YOKE底座 BRUSH电刷 BRUCH HOLDER电刷架 BRUSH电刷 ARMATURE电枢 CONTACTOR触板 BALL BEARING球轴承 BUSHING衬套 MAGNETIC SWITCH电磁开关 REAR END COVER后端盖 BRUSH电刷 惰轮 IDLER GEAR STEEL BALL钢珠 YOKE机座 PINION GEAR驱动齿轮 CLUTCH GEAR离合器 PINION STOP COLLER止动套 ARMATURE 电枢 BALL BEARING球轴承 HOUSING盖板 PLUNGER活动铁芯 OUTER GEAR TOOTH INTERMESHING STARTER 轴承 ROLLER OVER RUNNING CLUTCH OUTER GEAR TOOTH INTERMESHING STARTER 离合器 MAGNETIC SWITCH 电磁开关 REAR END COVER 后端盖 BRUSH电刷 IDLER GEAR惰轮 STEEL BALL 钢珠 YOKE机座 CLUTCH GEAR离合器齿轮 PINION驱动齿轮 ARMATURE电枢 BALL BEARING球轴承 HOUSING壳体 OVERRUNNING CLUTCH离合器 THROUGH BOLT贯穿螺栓 BALL BEARING BRUSH HOLDER电刷架 FELT WASHER油封 ROLLER滚子 RETAINER挡圈 球轴承 PINION GEAR驱动齿轮 INNER BAREEL内圈 OUTER BAREEL外圈 滚柱 ROLLER SPLINE TUBE花键套管 STOP COLLAR挡圈 STARTER PINION CLUTCH起动机离合器 ENGAGEMENT 啮合 OUTER BAREEL WITH TUBE ROLLER滚柱 PINION GEAR驱动齿轮 INNER BAREEL WITH PINION GEAR 带套管的外圈 带驱动齿轮的内圈 DISENGAGEMENT脱开 OUTER BAREEL WITH TUBE ROLLER滚柱 PINION GEAR驱动齿轮 INNER BAREEL WITH PINION GEAR 带驱动齿轮的内圈 带套管的外圈 STARTING CIRCUIT起动电路 ALTERNATOR发电机 STARTER SWITCH点火开关 FUSIBLE LINK保险丝 STARTER MOTOR起动马达 BATTERY电瓶 马达继电器 STARTER BLOCK RELAY WHEN THE STARTER SWITCH TURN TO THE START POSITION ALTERNATOR发电机 STARTER SWITCH点火开关 FUSIBLE LINK保险丝 STARTER MOTOR起动马达 BATTERY电瓶 STARTER BLOCK RELAY 马达继电器 触电CONTACT POINT 点火开关打到“起动”位置 AFTER CONTACT