產品出口檢查 General Inspection Procedure.pptVIP

General Inspection Procedure Arrive at Factory Open Meeting Sample Selection Visual Inspection On-site Tests Close Meeting Confirm Result with MTS - HK Inspection Preparation Leave the Factory General Inspection Procedure Samples need to be selected randomly. Stamp on the selected cartons with MTS Inspector Chop. General Inspection Procedure Supervise the process in which the selected cartons are being transferred from warehouse to where the inspection is taken place (e.g. inspection room) General Inspection Procedure Arrive at Factory Open Meeting Sample Selection Visual Inspection On-site Tests Close Meeting Confirm Result with MTS - HK Inspection Preparation Leave the Factory General Inspection Procedure Visual Inspection Before performing workmanship inspection on each sample: Verify actual packing method V.S. ISTA test report. General Inspection Procedure Take photo at each packaging stage. (i.e. open the package step by step) General Inspection Procedure Example of Packaging Photo General Inspection Procedure General Inspection Procedure Report any discrepancy on packaging (check against ISTA report). Inspector should also verify part inventory against claims on Costco Non-Foods QA Test Inspection Request Form. Example of claim of hardware inventory on Spec. General Inspection Procedure Verify all labeling on the package sample. All labels such as product, packaging, bedding tag etc., much match those approved in the test report (i.e. QL Test Report). Report any discrepancy on the labeling. Any correction or improvement made on the inspection sample must be mentioned on the inspection report. General Inspection Procedure Take Photo on Shipping Mark Take Photo on Color Label Take Photo on Wordings of Product Take Photo on Polybag Warnings General Inspection Procedure Performing visual workmanship check on each selected samples V.S. inspection protocol and client specific quality concerns if any. General Inspection Procedure Examine the Inspect