solaris 10 一些系统管理命令 和系统备份方法.docVIP

solaris 10 一些系统管理命令 和系统备份方法 标签： solaris? 10? 系统管理? 系统备份? 2009-04-01 10:10 1.查看系统版本和系统型号uname -aunmae -XCat /etc/releaseshowrevSunOS5.10其实和Solaris 10是一个东西，名称不同，与Solaris系统的起源相关。下面是两者的关系介绍： History In 1987, ATT and Sun announced that they were collaborating on a project to merge the most popular Unix variants on the market at that time: BSD, System V, and Xenix. This would become Unix System V Release 4 (SVR4).[3] On September 4, 1991, Sun announced that it would replace its existing BSD-derived Unix, SunOS 4, with one based on SVR4. This was identified internally as SunOS 5, but a new marketing name was introduced at the same time: Solaris 2.[4] While SunOS 4.1.x micro releases were retroactively named Solaris 1 by Sun, the Solaris name is almost exclusively used to refer to the SVR4-derived SunOS 5.0 and later.[5] The justification for this new overbrand was that it encompassed not only SunOS, but also the OpenWindows graphical user interface and Open Network Computing (ONC) functionality. The SunOS minor version is included in the Solaris release number; for example, Solaris 2.4 incorporated SunOS 5.4. After Solaris 2.6, Sun dropped the 2. from the number, so Solaris 7 incorporates SunOS 5.7, and the latest release SunOS 5.10 forms the core of Solaris 10. 2.显示系统中磁盘的数量 format root@IEDB # formatSearching for disks...doneAVAILABLE DISK SELECTIONS:?????? 0. c1t0d0 SUN146G cyl 14087 alt 2 hd 24 sec 848????????? /pci@1f,700000/scsi@2/sd@0,0?????? 1. c1t2d0 SUN146G cyl 14087 alt 2 hd 24 sec 848????????? /pci@1f,700000/scsi@2/sd@2,0?????? 2. c1t3d0 SUN146G cyl 14087 alt 2 hd 24 sec 848????????? /pci@1f,700000/scsi@2/sd@3,0 但是，如果系统中存在硬件raid，format显示的有可能是做过raid的之后的逻辑盘。上例中，c1t0d0就是一个逻辑盘，从下边的命令中可以看出。 3.显示系统中软件raid的配置 metastat 4.硬件raid系统配置工具 raidctl 该命令可以显示和配置raid。如显示逻辑硬盘和实际的物理盘 root@IEDB # raidctlController: 1??????? Volume:c1t0d0??????? Disk: 0.0.0??????? Disk: 0.1.0??????? Disk: 0.2.0??????? Disk: 0.3.0则Volume:c1t0d0就是做过raid的逻辑盘，下面则表示系统中有4个物理盘。可以显示控制器的