汽车磨合期（Automobile running in period）.docVIP

汽车磨合期（Automobile running in period） When the engine assembly has been speed adjustment, therefore some number called zero kilometers running. But for the cars power system, not only the engine, including many aspects, it is recommended to run well. The first thing is not to run too fast. Even if the engine has been tested at high speed, it is also a test without load, and the load on the whole vehicle, transmission and follow-up steering can not be ignored. 3, specifically, the first 2500 kilometers of the stall speed (recommended): not more than 1 stalls, 2 stalls 20 miles 40 miles, 60 miles, four third file 80 file 100 Mai Mai, 5. The main objective is to make the new clutch joint smoothly, the gear boxes are well aligned and the power output is smooth. But be careful, dont always use a gear running, to avoid the severe fever caused by internal heating gear gear box uneven deformation is not uniform, then shift when the occlusion problem will produce metal debris. As we all know, many metal parts have to be placed in the natural environment for a period of time before they are produced, so that they can be annealed naturally, and the internal stresses are balanced. The running in of the car is also the reason. In 4, misunderstanding - pulling speed: people often have an argument, is to pull high-speed car 2500 after the run, let the car run a speed limit, I dont understand what he was trying to destroy a car or to keep a car, a child will run, you can let him participate in the Olympic Games 100 race? But there is a reason or Lara, is to clean up the carbon deposition and the gasoline colloid, reason is the first 2500 km most drivers tend to low engine speed, the speed is low, leading to internal engine especially the spark plug and other parts to generate carbon deposition, and the nozzle at the cold and hot gas impurities in the formation of colloid paste. The solution is Lara speed. I said several times, that is, after 2500 kilometers, the speed of the top spee