水贴纸使用办法（How to use water stickers）.docVIP

水贴纸使用办法（How to use water stickers） First of all, the principle of water stickers is dissolved in water pressure adhesive resin film on the back of the G after this sol and coating, so water paste it as far as possible to maintain joint surface smooth, to ensure the sealing degree. Introduce a relatively tired but can ensure some sesame method effective fruit, there is need two bottles: water stickers sealing agent (blue bottle shop, people might say he is emollient, but he really is the sealing agent), water softener stickers (green cover, this is the real softener...) These general model stores can be bought. Water stickers need to be soaked in warm water, but only when the sticker slips off the hard paper on the bottom of the blue. In the first place you need to discount stickers with sealing agent (first stir before use, because the glue will precipitate) and then carefully affixed stickers, Sheung Shui (that is, as mentioned, smooth slippery in the joint surface), because the softener also contains water stickers, so to complete this step as soon as possible. Water sticker sticky in the proper position, in the water stickers sealing agent was not completely dry before quickly in the water surface with water softener stickers stickers, stickers, once the water softening surface will produce many fold. When the water label is half dry, the cotton swab is then trimmed for an hour. Semi dry state with moisture content of cotton swabs, the excess sealant to wipe off the glial, wipe off with glue and fold into small pieces of paper and other tools to dry residual water stickers, with dense adhesion agent collocation let water softener, stickers tight adhesion on the surface, can prevent stickers albino (with white spots, water paste stickers finish after drying due to surface and water with the void). The method on the model surface (including most painted) are generally applicable, of course, if it is very smooth surface and you can remove the front sealing agent ste