新桩栽植先打坯（The new pile planting to bloom）.docVIP

新桩栽植先打坯（The new pile planting to bloom） Forwarding a very practical, operational strong essay. Beginners must read. The new pile planting to bloom Xiaoxiaoyang The new planting pile before making bricks, blanking task is for shaping complex stumps, from multiple perspectives and direction of trial pile, to determine the best solution from a variety of ideas. The new planting pile before making bricks, making bricks is the task of setting (determine what type), surface (optimum viewing surface), set (to determine the angle and height of planting planting), support (to determine the fate of Banjia branch). The four are interrelated and restrict each other. In the actual billet, has great randomness to determine these factors, should be a concrete analysis of concrete stump. This article will sum up some of the rules. I. finalize the design It emphasizes the steps and principles of the setting up: 1. the steps of the tree stump setting should be: first determine the number of dry leaves (determine to leave a few dry) - then determine the top of the tree (where the remains are dried and where the new tree will be cultivated) - the later cut. For many dry trees, we should follow the order of first big, small later, first lord second. 2., the principle of tree stump setting is: in accordance with the premise of the beauty of the basin, we should pay attention to: (1) make full use of material. To be specific, we should take more and get bigger (but this principle must be within the height allowed by the basin and not exceed one meter in the shape of the tree). (2) as far as possible to choose the scheme of fast blanking forming, the key point is take, take a small top section. (3) pay attention to the characteristics, namely setting special pile should make its characteristics to get the best show. On the basis of the above steps and principles, the examples are given below: Take the shape of Figure 1 as an example, first of all, how many leaves should be determined? Acco