机动车整车产品.pptVIP

* * * 生产一致性计划的变更，除涉及COP试验或检查、关键件以及产品的一致性性和及标准的符合性的项目需要事先向认证机构申报外，其他项目如：一些关键过程控制方式的变更、人员和设备的变更、生产不一致追溯和处理措施的变更等，可在此执行报告中向认证机构每年提交一次说明。凡生产一致性控制计划发生变更的，除在执行报告中进行变化说明外，企业还应另提供一份新版本的生产一致性控制计划。 Any change of COP control plan, which concerns COP test/inspection, critical component, consistence of products, compliance with standards, etc., shall be declared to the certification body in advance. Other changes, e.g., concerning critical process control means, staff and equipment, non-conformity retroaction and treatment, etc., may be explained, in the executive report, to the certification body once per year. For any change made to the COP control plan, the detailed change shall be explained in the executive report; in addition, manufacturer shall furnish a renewed COP control plan. 生产一致性控制计划执行报告Executive report of COP control plan . 4、制造商在发现产品存在不一致情况时，如何落实在认证机构的监督下采取一切必要措施，以尽快恢复生产的一致性的相关规定；以及制造商在发现产品存在不一致情况时，所采取的追溯和处理措施的规定。 Provisions relating to the cases where manufacturer finds a non-conformity (i.e., how to take all the necessary measures under the supervision of the certification body, for restoring the COP as quickly as possibly; and how to trace back and handle the non-conformity). 生产一致性控制计划执行报告Executive report of COP control plan . 谢 谢!Thanks for your attentions! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 机动车整车产品 生产一致性审查要求说明 Explanations on COP (Conformity of Production) Check Requirements for Motor Vehicles 背景 Background 国家认监委2008年1号公告，发布了对汽车产品强制认证实施规则进行修订和证书换版的要求，规则编号变更为CNCA-02C-023:2008。 The CNCA Announcement No.1 of year 2008 announced the revision of auto product compulsory certification implementation rules and the requirements of certificates update, the code of the rules change to CNCA-02C-023:2008 背景 Background 此次规则的修订主要包含以下四各方面的变化：