comparison of conventional varnishes with nanolacke uv varnish with respect to hardness and adhesion durability比较传统清漆nanolacke uv漆硬度和附着力耐久性.pdfVIP

Int. J. Mol. Sci. 2008, 9, 476-485 International Journal of Molecular Sciences ISSN 1422-0067 © 2008 by MDPI /ijms Full Paper Comparison of Conventional Varnishes with Nanolacke UV Varnish With Respect to Hardness and Adhesion Durability Bulent Kaygin * and Emre Akgun † Zonguldak Karaelmas University, Bartin Forestry Faculty, 74100 Bartin, Turkey; † E-mail: emre_akgun_15@   * Author to whom correspondence should be addressed; E-mail: bulentkaygin@; Tel.: +90378 2277422; Fax: +903782277421 Received: 7 February 2008; in revised form: 14 March 2008 / Accepted: 22 March 2008 / Published: 2 April 2008 Abstract: The long-term durability of varnished wooden surfaces used in either indoors or outdoors environments depends on the resistance of varnish layers on these surfaces against potential physical, mechanical and chemical effects to which they may be exposed. In this study, “Nanolacke ultraviolet varnish”, developed by a Turkish dying and varnish industry company and widely accepted as a 21st century technology has been compared to other conventional varnish systems widely used in the industry in terms of dry film resistance properties. In this study, cellulosic, polyurethane, polyester, synthetic and Nanolacke ultraviolet varnish have been applied on beech (Fagus orientalis L.) and oak (Quercus robur L.) wood samples which had been prep