滁州博西华技术标.docVIP

工程概况Generals of Project 1.1工程概述Work Summary 工程名称：博西华滁州项目土建及建筑装饰工程Project name: Civil and Architectual Finish Works of Chuzhou Project of BSH 工程地址：滁州市西门子路1号Project Location: at 1 Ximenzi Road, Chuzhou, Anhui Province, P.R.China 发包单位：博西华家用电器有限公司The Owner: BSH Home Appliances Co., Ltd 总承包单位：西图建筑工程（上海）有限公司General Contractor: CH2M HILL Constructors (Shanghai) Co., Ltd 设计单位：中国海诚工程科技股份有限公司（原中国轻工院上海设计院）Design Institute: China Haisum Engineering Co., Ltd. (former name: Shanghai Design Institute of Light Industry of China. 本项目建在博西华家用电器有限公司厂区内，厂址位于滁州市西门子路1号，?占地面积为138500平方米。本工程交通便利，南临西门子路，东临定远路，北临凤凰路，市区距南京市直线距离约50公里，属于南京都市圈内伙伴城市，一小时车程可达南京禄口机场 。京沪铁路，合宁高速公路，蚌宁高速公路穿越市境，待建中的京沪高速铁路，宁西铁路将在市境内通过，滁河航运直达长江。This project is located inside BSH Home Appliances Co., Ltd. At 1 Ximenzi Road, Chuzhou, Anhui Province, P.R.China with a floor area of 138,500 square meters. This project offers a convenient communication. It faces south of Ximenzi Road, east of Dingyuan Road, north of Phoenix road. The straight distance of the urban area to Nanjing is about 50 kilometers. It is a partner city belonging to the Nanjing downtown area. An hour drive can get to the Lukou Airport in Nanjing. Beijing-Shanghai Railway, Hefei-Nanjing Highway, Bengbu-Nanjing Highway pass through the city. Beijing-Shanghai Highway to be built will pass through the city. Chuzhou River can take ships directly to Yangtze River. 1.2建筑概况Generals of Architecture SBS生产车间为单层厂房，局部夹层，轻钢结构，总建筑面积15312.3M2，占地面积12869.3M2 ，生产车间总长为193.08M，总宽64.18M，柱顶标高13.6M，基本柱网12M X 21M，建筑地坪标高相对于绝对标高为22.65M。室内外高差为0.15M。外墙0.9M以下为240CM的砌块墙，0.9M以上为双面金属波纹板夹矿棉墙体，屋面采用双面金属波纹板夹保温棉屋面。轻钢结构的钢梁等承重构件均刷防火涂料使其耐火等级达到一级。SBS生产车间的生产类别为丙类，耐火等级为一级。SBS生产车间内包括生产区、辅助用房（面积1674.8M2），3M宽架空通道。生产区内主要有壳体发泡区、容器热塑成形区、装配线、测试线等；生产辅助用房包括卫生间、更衣室、办公室、餐厅。SBS生产车间南北夹层设有生活辅助区，面积分别约400 M2，各有一部疏散楼梯直通室外，夹层标高5.4M；3M宽架空通道南北贯穿SBS生产车间，净高6.5m，南起厂区主通道与原有C1厂房间的人行道，北至厂区的原有主办公大楼A4。SBS生产车间外架空通道面积 172.7 M2，标高7M，总长43.2M。SBS生产车间屋顶设有易熔材料采光天窗。The SBS workshop is a single-storey building, with partial light steel str