毕业论文 智能指纹摇控器设计.docVIP

PAGE PAGE 6 毕业设计（论文） 题目名称：智能指纹摇控器设计 院系名称：电子信息学院 班 级：测控032 学 号：20030444227 学生姓名：李军林 指导教师： 常静 2007 年 6 月 1摘要 本文详细阐述了，利用基于MCS-51体系结构的嵌入式微控制器AT89C2051，进行保险柜配套指纹遥控器设计开发的全过程。其中，在综合论证设计方案之后，重点讨论了基于AT89C2051微控制器的指纹遥控器的硬件设计过程，并给出此系统的软件开发与系统调试的基本思路。作为嵌入式设计的基本特征，本次设计涉及到许多前沿技术的探讨，如红外通信技术，指纹识别技术，嵌入式设计技术等。作为本次设计不可分割的一部分，本文对设计中红外通信的研究与试验进行详尽的阐述，并对嵌入式系统实验与指纹模块的测试作了相应的说明。 关键字：AT89C2051，嵌入式系统，红外通信，指纹识别，指纹遥控器。 Abstract This paper is detailed to expatiate the whole process that making use of the embedding microcontroller of MCS-51， which according to the structure of the AT89C2051 system, how to design and develop a fingerprint remote controller of the safe kit. Among it, after synthesizing argument design project, the point discussed the process that how to design the hardware of the fingerprint remote controller by using the LPC210x microcontroller. At the same time，it is showed that the basic thinking of that, how to develop the software for the system and how to debug the system. As an embedded system design, the design of this time involves much front technic , such as the infrared communication technique, the fingerprint identifies technique, the embedded system technique, and so on. As an indivisible part of this design, this paper shows all on the infrared communication technique researching with experiment, and describes the experiment of embedded system and the test of fingerprint module. Keywords: MCS-51,AT89C2051, Embedded System, Ifrared Communication Technique, Fingerprint Identifies Technique, Fingerprint Remote Controller . 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc170033773 1　绪论 PAGEREF _Toc170033773 \h 1 HYPERLINK \l _Toc170033774 1.1 国内外同类研究概况综述 PAGEREF _Toc170033774 \h 1 HYPERLINK \l _Toc170033775 1.2　保险柜指纹遥控器研制的意义 PAGEREF _Toc170033775 \h 1 HYPERLINK \l _Toc170033776 2　方案论证 PAGEREF _Toc170033776 \h 3 HYPERLINK \l _Toc170033777 2.1 系统需求分析 PAGEREF _Toc170033777 \h 3 HYPERLINK \l _Toc170033778 2.2　方案的比较与确定 PAGEREF _Toc17003377