SolidCAM 5 Axis Tutorial SolidCAM CAM （SolidCAM 5轴教程SolidCAM凸轮）.pdfVIP

SolidCAM 5 Axis Tutorial Volume 1 – Beginner 1 Goals of this Tutorial  To understand post settings and machine simulation settings  To understand the advanced concepts of 5 Axis  To understand the basic parameters used in defining the toolpath  To understand the parallel strategy of 5 axis machining  To create machine simulation 2 Part file used in this exercise: Basic Training.Sldprt Post processor used: DMU100_Monoblock_iTNC530_5x Machine simulation DMU_100 3 Chapter 1 Opening the Part and Starting SolidCAM 4 Do the following to open a part: Double click the SolidWorks icon and open Basic Training.SLDPRT part.  Before starting SolidCAM, you need to do the following settings that will enable you to select the right post processor and the machine associated with the post processor. To do the settings: Click SolidCAM tab in SolidWorks. Click SolidCAM Settings. In SolidCAM Settings, you must concentrate on the following 2 tabs in the settings area:  The path for machine simulation files  The location of the post processor 5 Path for Machine Simulation Files Post Processor Location By default, the post processor files and the machine simulation files are located on this path: /root/Program Files/SolidCAM/Gpptool. But, it is a good practice to create sepa- rate folders in the root directory for the post processor and the machine simulation. For example, C:/GPP C:/Machine_Sim. The advantage of creating separate folders is that the post processor and machine simulation files remain intact even when the SolidCAM version is