Service Data Sheet ascycles（服务数据表ascycles）.pdfVIP

Service Data Sheet Issue 9 - 12.2012 This document is protected by copyright and may not, in whole or part be stored in a retrieval system, or transmitted in any form or by any means, copied, photocopied, translated or reduced to any machine-readable form without prior consent in writing from Triumph Motorcycles Limited. No liability can be accepted for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. Triumph Motorcycles Limited reserves the right to make changes and alter specifications without prior notice and without incurring an obligation to make such changes to products manufactured previously. See your authorised Triumph dealer for the latest information on product improvements incorporated after this publication. All information contained in this publication is based on the latest product information available at the time of publication. Illustrations in this publication are intended for reference use only and may not depict actual model component parts. © Triumph Motorcycles Ltd. 2012 i SERVICE DATA SHEET America from VIN 468390/Speedmaster from VIN 469050 with Electronic Fuel Injection (EFI) Brakes Brake disc maximum run out. . . . . . . . . . . . . . 0.3 mm (front and rear) Brake disc minimum thickness. . . . . . . . . . . . . 5.0 mm (front and rear) Brake fluid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . DOT 4 Master Cylinders Front Rear 15 Nm 25 Nm