GENERAL REQUIREMENTS FOR DRAWING （一般要求画）.pdfVIP

SFLC STANDARD SPECIFICATION 0085 GENERAL REQUIREMENTS FOR DRAWING PREPARATION 1. SCOPE 1.1 Intent. This specification establishes requirements for the uniform preparation of working drawings and as-built drawings using various referenced standards. Drawing preparation may include revision of existing drawings and complete drafting of new drawings (including completely new drawings that didnt previously exist and new drawings that are redrawn from existing drawings. 2. REFERENCES COAST GUARD DRAWINGS None. COAST GUARD PUBLICATIONS Coast Guard Commandant Instruction (COMDTINST) M9085.1B, Oct 2004, Naval Engineering Computer Aided Design Standards OTHER REFERENCES American Society of Mechanical Engineers (ASME) Y14.1, 2005; Drawing Sheet Size and Format American Society of Mechanical Engineers (ASME) Y14.2, 2008; Line Conventions and Lettering American Society of Mechanical Engineers (ASME) Y14.3, 2003; Multi and Sectional View Drawings American Society of Mechanical Engineers (ASME) Y14.38, 2007; Abbreviations and Acronyms American Society of Mechanical Engineers (ASME) Y14.5, 2009; Dimensioning and Tolerancing American Welding Society (AWS) A2.4, 2007; Standard Symbols for Welding, Brazing and Nondestructive Testing MIL-D-23140, April 1992; Drawings, Installation Control for Shipboard Electronics Equipment MIL-PRF-5480, July 1998; Data, Engineering and Technical, Reproduction MIL-STD-22, Mar 1991; Welded Joint Design MIL-STD-25, Dec 1990; Ship Structural Symbols for Use on Ship Drawings MIL-T-31000, July 2004; Technical Data Packages, Specifications For NAVSEA Drawing No. 53711-803-5001049, July 1989; Piping System Symbols and Abbreviations NAVSEA Publication S0300-AT-GTP-010/ESL, 1988;