音响改装（Sound modification）.docVIP

音响改装（Sound modification） This is to ensure sufficient cone vibration The trip (ten installation workers directly installed), and then put a fixed wiring, listen, OK, see the straight smile - Master You really can toss... The speaker connection available 50 or 100 core ordinary car audio line (about 4 yuan / M) on the line, oxygen free copper The silver line or silver line of car audio (even BMW) is the concept of significance than practical significance, Because the car (even to BMW) because of environment and the focus and the listening room is different, the pursuit of music realm of complex factors The audio (such as CD), audio playback device (the CD drive) amplifier, speakers, and equipment, and listening to music. The environment, location, the quality of music... Is not that some aspects can get results, what Some factors to lack only on the one hand, will bring the whole system to your friendly CD cast to the wind, no good Play equipment is no good, a good player, not good is no good material, good material and appropriate CD player Good good, audio equipment is no problem, there is no good listening environment and time (such as traffic rolling not channeling A bicycle and old lady Street) in vain, have to understand more good, so suitable enough Is good. Now a lot of vibrating membrane speaker, the traditional paper and improved quality paper, cloth, mica plates polymerization of me... People think that the quality of the paper cone loudspeaker sound is clean and pure, the most beautiful (for my own use Cone). But the car with the best polymerization basin, because strong and durable, not afraid of water (relative cone), more suitable for complex The use of the environment. The low frequency characteristic of loudspeaker is mainly decided by two aspects, a look at the speaker caliber, more and more low frequency limit Low; two see basin, the original paper pots, good rigidity, high elasticity and high sensitivity, so low frequency characteristic is not go