水晶头网络连线（Crystal head network connection）.docVIP

水晶头网络连线（Crystal head network connection） There are two lines of cable, one is crossed lines, and one is parallel lines The crossing method is: one uses 568A standard, the other uses 568B standard Parallel line approach is: both with the 568A standard or 568B standard (generally used are 568B parallel line approach) 568A standard: green, white, green, orange, white, blue, blue, white, orange, brown, white, brown 568B standard: orange, white, orange, green, white, blue, blue, white, green, brown, white, brown You can note that the difference between the two approaches is that orange and green change. If the status of the connection is unequal, parallel lines, such as a computer, are connected to a router or switch If the two connected devices are peer, cross lines are used, such as a computer connected to a computer ========================================== We use the cable clamp cable sheath peeling off function, see eight wire color and white intertwined. Four colors of orange, green, blue, brown, intertwined with their are white orange, white and green, white and blue, white or brown, slightly orange, only white, if it is pure, be careful, do not confuse the four white. We will remove their wound, pay attention to the display of the order is: Orange Green Brown, white in front, blue green swap. That is to say, the final results are white orange, orange, white, green, blue, white, blue, green, white, brown, brown (suitable for computers and routers, dial-up cats, switches). After the position will settle the straight line, trimming using cutting tool, cable clamp cutting tool are usually, make sure the Baoqie neat, then flat into the crystal head, hard on top, when from the first crystal before see lines arranged neatly, use crystal line pliers the extrusion module head pressing. The order of making this network is the generic method of making B cable. If it is a type of cable, the order of production is orange green swap, into: white, green, green, white, orange,