自行车使用说明说（Bicycle instructions）.docVIP

自行车使用说明说（Bicycle instructions） The complicated circuit of the traditional electric vehicle becomes concise and makes the vehicle more beautiful. 8, with battery power display, users can understand the battery power in a timely manner Three. Introduction of electricity indication: Red, orange, green Full bright 90%--100% Red orange, Green kill 15%--90% Red, bright, orange and green Undervoltage, power failure protection, to be charged Four, the main technical parameters of the product 1, the main technical parameters of the car Wheel size: 16 inches Vehicle weight: 15 kg Mileage continued: 30 km Load: 75 kg Maximum speed: 20 km / h 2. Main technical parameters of lithium ion batteries Battery capacity: 8AH Nominal voltage: 24V 3, the main technical parameters of the motor Motor form: brushless Holzer motor Rated output power: 180W Rated voltage: 24V Rated output torque: 30N.m Rated speed: 350rpm 4. Main technical parameters of controller and charger Undervoltage protection value: 22.2V Overcurrent protection value: 15A Voltage charging mode: intelligent fuzzy charging The second chapter operation mode First, start: 1, start riding, release the brake, turn on the speed control, turn on the key switch, speed, the instructions on the light, rotating speed control, you can travel at 1 - 20 km / h speed. 2, if only the red light, indicating lack of electricity, need to charge. Two, driving: 1, the vehicle in the course of driving under the influence of electricity, in case of uphill, wind, bad road conditions can help manpower pedal, in order to extend the continuation distance. 2, when the vehicle power is less than 15%, the speed switch on the red light, the controller cut off the output, the motor does not move. You can release, turn, use pedal riding, after a few minutes, the battery will be restored to a certain amount, speed, turn on the red light, orange light, then turn the controller will turn to the motor to send electricity. Repeat several processes, the batter