霓虹灯按装规范（Neon lamp mounting standard）.docVIP

霓虹灯按装规范（Neon lamp mounting standard） Neon lamp mounting standard Neon lamp according to installation specification (1) - 1 range This standard specifies the neon lamp project in neon lamp device (including neon lamp tube, lamp bracket, neon lamp transformer), power distribution control box (cabinet), lightning arrester and similar equipment installation requirements, test methods and acceptance criteria. This standard applies to all kinds of indoor and outdoor neon lamp projects and similar devices. 2 normative reference documents The terms in the following documents are referenced by this standard and become the provisions of this standard. Fordated documents, subsequent amendments (excluding corrections) or revisions do not apply to this standard, however, encourage the latest version of the parties to agreements based on this standard using these files. Any undated reference document whose latest edition is applicable to this standard. General safety requirements and tests of GB 7000.1 - 2002 Luminaires (IEC, 60598-1:1999, Luminaires - Part, 1:Generalrequirements, and, tests, IDT) GB 7251.1 low voltage switchgear and equipment and control equipment Part I: type test and part type test complete equipment (GB7251.1 - 1997, IDT, IEC, 60439:1992) GB 7251.3 low voltage switchgear and control equipment and equipment Part third: Particular requirements for non professional personnel can enter the field of low voltage switchgear and control equipment and equipment distribution board (7251.3 - 1997 GB, IDT IEC 439-3:1990) GB19149 General requirements and safety requirements for transformers (neon lamp transformers) for tubular discharge lamps (GB 19149-2003, IEC, 61050:1991, IDT) with an unloaded output voltage exceeding 1000V GB 50057 code for lightning protection design of buildings Code for construction and acceptance of grounding devices for installation of GB 50169 electrical installations GB 50303 construction code for acceptance of electrical engineering constructi