铺设地板方法（Floor laying method）.docVIP

铺设地板方法（Floor laying method） One, laying tool tztogo, this web site up to see Paved floor secret: seven tools, three important tools visible technology . Different floors, different places of use, the laying of different methods, tools used are very similar. Power tools: electric hammer, drill, saw, marble curve saws, steam pump, air gun, planer, grinder, sander. Hand tools: hand, saws, ink, steel tape, wire rope, square, pencil, rubber hammer, hammer, axe, punch, scraper, screwdriver, pliers, chisel, planing, according to steel. Special tools: moving hook, tensioning, moving hook. The tools are out of order for the laying of the works. Workers without basic tools are not allowed to mount guard. All tools, the engineering team responsible for their own preparation, so easy to manage. Two. Inspection before laying To be a man, to work, to talk about principles, to lay down the floor, also to talk about science, adhere to the principles, specifically: Two approvals: (1) inspection and approval of floor quality, varieties, specifications and quantity; (2) laying method, laying quality and approval of steps. Five without laying: (1) the wall is leaking wet and the ground is not dry (2) mixing construction, (3) forced use of inferior materials, (4) time too fast, unable to implement the process, (5) requirement floor board face does not have chromatic aberration, absolute level! Three, laying common methods and direct bonding method (1) laying out common methods; 1, direct method. 2, suspension shop, try. 3, do not glue, suspension, shop, try. 4, keel shop try. (two) direct bonding method: suitable for fine board paving Board (tofo laying floor) Preparation before construction 1. Material preparation The main raw materials are plate, adhesive, surface treatment agent, putty, sand paper and other materials. (1) ground plate: buy wooden floor, the amount of paved area plus 5%-10% margin. After the purchase of land plate selection, sub heap. Selection can be divided into thr