画建筑施工图的心得（Drawing architectural drawings of experience）.docVIP

画建筑施工图的心得（Drawing architectural drawings of experience） Drawing architectural drawings of experience Draw the construction drawing according to the order of leveling, vertical and cutting. I. plane 1, clearly marked apron, steps, steps, stair railings, fence, expansion joints (deformation) approach; 2, the layout of kitchen and toilet, including toilet, washbasin, bath, floor drain and drain slope direction (1%), interior elevation (typically below floor height 0.030m); The plane layout, including 3 balcony, floor drain and drain slope direction (1%), drying racks, railing, interior elevation (generally lower than the floor height of 0.030m); 4, each room function mark; 5, indoor and outdoor ground elevation, stair elevation; 6. Mark the distance of the axle first, then mark the detail size; 7, staircase plane layout, marked clear step size; ladder wells generally 120-200, more than 200 need to add protective measures. 8, roof drainage design, the dividing line is located across the midline, sloping building 2%, building 1% buildings for reverse slope, slope and slope water for building anti intersection line, downspouts approach; 9, people on the roof should be painted out of roofing; 10, water tank location and water tank inspection hole, climbing ladder; 11, the atlas or cornice practice, according to the scheme design requirements; 12, the sample plane index clearly; Two, the facade 1, plus elevation doors and windows, doors and windows in addition to considering the width of height, but also with reference to the height of the floor and beam height, glass curtain wall also consider the floor of the water off (usually 100-300 high); 2, the facade doors and windows as smooth as possible, to ensure that the facade effect; 3, elevation doors and windows high and wide difference, had better not exceed two building modulus (300); 4, door and window outline line slightly thick, meet inside wall, door and window outline with fine thread. Highlight the internal and exte