加速Win XP启动（加速Win XP启动）.docVIP

加速Win XP启动（加速Win XP启动） With the development of Windows operating system, now more and more powerful, more and more simple operation, but the system is starting more and more slowly. As far as the most popular Windows XP is concerned, many friends try various ways to reduce startup time, and use various optimization techniques or software to speed up the start-up process. The author today with a long experience in the use of a few practical skills to help you set the bar to see the acceleration of the Windows XP system startup. 1. disable unused IDE channels Acceleration principle: because the Windows XP system automatically detects the IDE device on the computer during startup, it closes the detection of idle IDE channels, thus accelerating system startup. However, there is a need to correct the mistakes that have been circulating on the Web: many people think its okay to simply disable unused IDE channels in BIOS, while others recommend closing them both in BIOS and in the system. First of all, the first method is fundamentally invalid, because all the BIOS independent monitoring computer hardware operating system XP can bypass the motherboard; the latter seems to make an unnecessary move. Therefore, only can be closed in the Windows XP system, in order to truly disable the idle IDE channel effect. [] the practice is as follows: right click my computer - Properties, then click the hardware and then click device manager, in which the open IDE ATA/PATA controller (different chips vary), and then into the primary and secondary IDE channel, such as: select the advanced settings, to find current transfer mode to not applicable one here (corresponding to the IDE channel is idle), will be the device type is set to no, ok. 2. manually set the IP address Acceleration principle: Windows XP system is developed on the basis of Windows 2000, so it supports rich network functions. In the Windows XP system will automatically detect whether the computer into the LAN in the boot, b