加速开关机（Acceleration switch machine）.docVIP

加速开关机（Acceleration switch machine） 1, to speed up the XP boot and shutdown speed At [start] [typing] [Regedit] Find the HKEY_CURRENT_USER\\Control Panel\\Desktop key and change the WaitToKillAppTimeout of the right window to 1000 (original setting: 20000) that closes the program and only waits for 1 second. Change the value of the key HungAppTimeout to: 200 (original setting: 5000), which indicates that the program has been waiting for 0.5 seconds when the program is out of order. Find HKEY_LOCAL_MACHINE\\System\\CurrentControlSet\\Control Set the key value WaitToKillServiceTimeout to: 1000 or less. (original setting value: 20000) Change the numeric data of the key [HungAppTimeout] to [200] 2, to speed up the reading ability to improve boot speed Windows XP read set can improve the system speed, speed up the boot speed. In the beginning of operation: type Regedit HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Control\\SessionManager\\ MemoryManagement PrefetchParameters on the right side of the window to find the numerical data of EnablePrefetcher will change as follows: PIII 800MHz or more can try to change the numeric data to [4] or [5] The following advice preserves the numeric data as the default value, [3] 3, shutdown automatically shut down, stop responding program Let the system shut down automatically and stop responding. Open the registry HKEY_CURRENT_USER\\Control Panel\\Desktop key and set the AutoEndTasks value to 1. (original setting value: 0) 4. Run the Defrag program when you start the computer At [start] [typing] [Regedit] [HKEY_LOCAL_MACHINE] [SOFTWARE] [Microsoft] [Dfrg] [BootOptimizeFunction] Set the key [Enable] to [Y] equal to open and set [N] equals off 5, reduce the wait time of multiple start To open the control panel \ \ \ \ system \ \ \ \ \ \ Advanced startup and recovery project by setting the system boot default operating system \ \ \ \ - two projects - you want to fill in the tick waiting time PS: if put 0\ system will not let you wait f