天正常见问题（FAQ）.docVIP

天正常见问题（FAQ） How cant the software toolbar and toolbar be adjusted? Please put the original 1. first installed the day by non genuine: add \ delete program uninstall all -- the installation directory is drainage folder to delete -- finally delete registry in the TWT folder (current_user and local_machine), re install it. 2. the way to bring up the menu: Ctrl+F12 or command line, type tmnload \Tangent\TWT6\sys\tch.tmn file loading). 3., the tool bar method: tool - Custom - toolbar -TCH, in front of the hook or the initial settings [start the day fast tool bar], in front of the hook can be. 4. if the toolbar and menu never appear, check to see if youve changed the system time, the software expires, and no toolbars and menus (trial version) will appear. Why cant I see the wall, line and marked text used in the day when they are opened with R14 or more than CAD2000? (printing does not show similar issues)? The 1. day of entities in the CAD is not to see, it needs to use the menu [save] or [the old version of the old version approved] command, save the Tengen 3 format, you can open 14 or other versions; if it is to save 2004 and above need to provide first CAD File menu in [for] to 02, and then save the old version of the Tengen 3 can; if you are using it open without showing, this figure may be damaged, or may be used in pirated disk problems. Note: [old version] is essentially different from [existing as]. The former decomposes, transfers, and stores the entities of the day, while the latter transfers only the general CAD objects. 2. install the day plug-in, you can see the graphics without destroying the entity, but you cant edit it. How to set up a CAD diagram can only be seen, can not change and edit Its 6.5 days to drain water, but be careful and keep your own backups. Non public order: protection of drawings T68_TProtect Used to encrypt drawings, must remember the secret, or can no longer edit, note: the encrypted map can not be blown. Decryption simply double clic