罗斯桥速度限制.docVIP

modified on 25 June 2009 at 07:13 ??? 102,654 views TransparentTrafficShaper From MikroTik Wiki Jump to: HYPERLINK /wiki/TransparentTrafficShaper \l column-one#column-one navigation, HYPERLINK /wiki/TransparentTrafficShaper \l searchInput#searchInput search Contents [ HYPERLINK /wiki/TransparentTrafficShaper \l # hide] HYPERLINK /wiki/TransparentTrafficShaper \l Introduction#Introduction 1 Introduction HYPERLINK /wiki/TransparentTrafficShaper \l Quick_Start_for_Impatient#Quick_Start_for_Impatient 2 Quick Start for Impatient HYPERLINK /wiki/TransparentTrafficShaper \l Explanation#Explanation 3 Explanation HYPERLINK /wiki/TransparentTrafficShaper \l Bridge#Bridge 3.1 Bridge HYPERLINK /wiki/TransparentTrafficShaper \l V3#V3 3.2 V3 HYPERLINK /wiki/TransparentTrafficShaper \l Mangle#Mangle 3.3 Mangle HYPERLINK /wiki/TransparentTrafficShaper \l Queues#Queues 3.4 Queues Introduction This example shows how to configure a transparent traffic shaper. The transparent traffic shaper is essentially a bridge that is able to differentiate and prioritize traffic that passes through it. Consider the following network layout: We will configure one queue limiting the total throughput to the client and three sub-queues that limit HTTP, P2P and all other traffic separately. Quick Start for Impatient Configuration snippet from the MikroTik router: / interface bridge add name=bridge1 / interface bridge port add interface=ether2 bridge=bridge1 add interface=ether3 bridge=bridge1 / interface bridge settings set use-ip-firewall=yes / ip firewall mangle add chain=prerouting protocol=tcp dst-port=80 action=mark-connection \ new-connection-mark=http_conn passthrough=yes add chain=prerouting connection-mark=http_conn action=mark-packet \ new-packet-mark=http passthrough=no add chain=prerouting p2p=all-p2p action=mark-connection \ new-connection-mark=p2p_conn passthrough=yes add chain=prerouting connection-mark=p2p_conn action=mark-packet \ new-packet-mar